Around the world with Docker!

DISCLAIMER: Not intended for production use! 

 

UPDATE 12102015 – I changed the dashes to regular dashes so if you copy and paste commands they will work!

You could probably tell from my last three posts that I have been experimenting with Docker. If you have no clue what I’m talking about then see below! If you haven’t spent the past few months of your life admiring the weave of the cat-5 cabling in the IDF then let’s proceed.

I like it easy. Putting things in Docker containers certainly makes life easy. It is even easier when you make Docker images out of Dockerfiles. I had a dream to have a DevOps platform that I could have everything I needed to create SDN applications all in one system and be able to deploy an identical platform in several minutes. Things like a HP VAN SDN controller, OpenDayLight controller, a LAMP server and possibly a mininet application to generate some flows.

If you have been following along with the last blog posts you just might have an Ubuntu:Mate platform with the Docker daemon running. Wouldn’t it be great to say “Docker pull xod442/macfind3” and have a LAMP server that you can start using in 5 minutes? How about “Docker pull xod442/van” and have the HP VAN SDN controller at your disposal? Go ahead and do it. They are both waiting for you. I wish it was that easy for me. I had to go around the world.

I started looking around Dockerhub and found the OpenDayLight SDN controller in a docker container (docker pull raseel/opendaylight_base). Quickly the docker image is downloaded and up and running by using the command ”docker run -d -p 8000:8000 -p 8080:8080 -p 6633:6633 -p 1088:1088 -p 2400:2400 raseel/opendaylight_base /opt/opendaylight/run.sh”. Point your browser to the docker host@ port 8080 and login with the default credentials of admin/admin. Very easy! I wanted it to be that easy for HP customers to get the HP VAN SDN controller but I didn’t have a clue on how to do it.

I started with the installation instructions. A few sudo apt-get installs and unpacking a debian file, a couple shell scripts to run, keystone users to build. I was in over my head and needed to call in the professionals. My first call for help was someplace near London England. A good friend and mentor who works for Docker, Dave, told me I would have to learn about something called supervisord. Lots of fascinating things over on his blog at: http://dtucker.co.uk/.

In a nutshell supervisord is like systemd and it stops and starts services and scripts. There were a few late nights learning how to use this. In the end it is not that difficult. Stay tuned for the blog on supervisord. Now I wanted to learn a little more about the startup process for the controller and what directories things are stored in. I called another pro in the Bay area who basically wrote the book on SDN. http://www.amazon.com/Software-Defined-Networks-Comprehensive-Approach/dp/012416675X. Chuck gave me some awesome information and it started me down another path of learning and exploration and led me right into CoreOS!

Hit the brakes….stop everything…..if you don’t know about CoreOS then get to the googeler quick! CoreOS is a lightweight operating system that is designed a lot like Chrome OS. It has an A and B side for booting. While your up and running on the A side, the B side is updating. A reboot puts you on the B side while the A side updates. BOOM! Mind blown! When the CoreOS boots up, IT IS DOCKER READY!!! More in the CoreOS blog later. If you can’t wait then look at this: https://www.youtube.com/watch?v=vy6hWsOuCh8. Another great thing about CoreOS is it is designed from the ground up to be deployed in clusters and managed by etcd. I know, I had to run out and build one right away. This stuff is exciting!

Back to the SDN controller in the container. Another call to the bay revealed another master mind Juliano Vacaro with R&D in Brazil. This is where I struck pure gold. It turns out that Juliano and his team have built the HP Van SDN controller in a container. I could most likely pull it and my adventure would be over. I don’t like taking the short cuts and I wanted to learn. Juliano shared with me some examples of Dockerfiles and supervisord.conf. They do things just a bit differently and run the SDN controller separate from the keystone server. I wanted it all in one docker image to make it very easy for customers to pull it and start running without having to link containers together (yes, you can do that).

In the end, it was building the Dockerfile (a script that tells docker how to build an image) that finally did the trick: Here are the contents of the Dockerfile.

================================================================

FROM ubuntu:14.04  # change14.04 with 12.04 for precise implementation

MAINTAINER Rick Kauffman <chewie@hp.com>

RUN apt-get update && apt-get install –no-install-recommends -y \
curl \
iptables \
iputils-arping \
net-tools \
ntp \
openjdk-7-jre-headless \
postgresql \
postgresql-client \
sudo \
supervisor \
software-properties-common \
ubuntu-cloud-keyring \
unzip

RUN rm -rf /var/lib/apt/lists/*

# Now add Keystone
RUN apt-get install –no-install-recommends -y ubuntu-cloud-keyring \
&& echo ‘deb http://ubuntu-cloud.archive.canonical.com/ubuntu trusty-updates/juno main’ >>/etc/apt/sources.list \
&& apt-get update \
&& apt-get install –no-install-recommends -y keystone

RUN rm -rf /var/lib/apt/lists/*

# Run the Keystone setup script
COPY ./setup-ks.sh /
RUN ./setup-ks.sh

RUN echo ‘* Allowing external access to postgres database’ \
&& sed -i — ‘s/host all sdn 127.0.0.1\/32 trust/host all sdn 127.0.0.1\/32 trust\nhost all sdn 0.0.0.0\/0 trust/’ /etc/postgresql/9.3/main/pg_hba.conf \
&& sed -i — “s/#listen_addresses = ‘localhost’/listen_addresses = ‘*’/” /etc/postgresql/9.3/main/postgresql.conf
COPY ./hp-sdn-ctl_2.4.6.0627_amd64.deb /home/hp-sdn-ctl.deb
COPY ./supervisord.conf /etc/supervisor/conf.d/supervisord.conf

COPY ./run.sh /
EXPOSE 5000 35357 8443 6633
ENTRYPOINT [“/run.sh”]

=====================================================

I needed a run.sh and a setup-ks.sh script along with the supervisord.conf file. Put all these files in a directory on a docker server, along with the debian package and issue the docker build –t ”xod442/van” . <– The dot at the end of this command will mess you up if you omit it. Then docker reads the dockerfile and creates the image. You can run the dockerfile over and over and it will produce the same exact image.

My trip around the world was fun and exciting (read: too many late nights in the lab) and I must say all the great people who helped me out are absolutely amazing, I cannot thank you enough. One thing for sure is I have an abundant amount of new topics to blog about. Stay tuned!

Now it is no longer necessary to stumble around getting your DevOps platform up and running. Get a docker server and start pulling!

Two commands to LAMP

Docker pull xod442/macfind3
docker run -d -p 80:80 xod442/macfind3 /usr/sbin/apache2ctl -D FOREGROUND

URL http://ip_address_of_docker_server

Two commands to get your HP VAN SDN Controller!

Docker pull xod442/van
docker run –privileged=true -d -p 8443:8443 -p 6633:6633 xod442/van /etc/supervisor/supervisord.conf
(The above two lines are actually one command)

URL https://ip_address_of _docker_server:8443/sdn/ui

SEE ……..EASY

Hit me up if you want to know more! I like to share!

Leave a Reply

Your email address will not be published. Required fields are marked *